Description
Similar to its older equivalent, it is designed for cameras and camcorders weighing up to 4.5kg. Therefore, it constitutes a basis for both DLSR cameras and small video cameras. B-Slide 60 II has been fitted with several new components to improve the comfort of operation. The slider’s platform features 4 Teflon rollers which make the device’s movements fluid, very silent and free of the so-called stick-slips. Teflon-coated rollers are resistant to clingy specks of dust, sand and other dirt which hinder the platform’s slide motion. Two of the platform’s rollers bring horizontal and vertical axis adjustments allowing to freely customize the platform’s sliding motion.
The platform also features a centrally positioned ¼” male screw with 3/8” adapter which allows mounting a photo or video head. Moreover, it is equipped with four ¼” female bolts for additional accessories and the gravitational brake. The Arca-Swiss mount is yet another practical solution used in Genesis B-Slide 60 II, as it allows to mount the slider along the entire length of the guide rail and directly to the header.
The slider can be also attached to tripods the classic way using screws, as the guide rail comes with five threaded ¼” holes and a centrally positioned hole, with the diameter of 3/8”. Another novelty adapted for the B-Slide II series are weight pulleys. By attaching a permanent load, you can easily adjust the platform’s sliding speed. Pulleys are located on both ends of the guide rail.
The slider’s legs can be dismounted and their length may be adjusted to change the slider’s height. If the Genesis B-Slide 60 II is used on uneven ground, it may be leveled by independently adjusting the length of a given leg.
Genesis B-Slide 60 II is almost entirely made of the anodized aluminum to ensure high quality, rigidity, and the long life span of the device.